NOTE: If diagnostic trouble codes (DTCs) are already being displayed from a previous read operation, press and hold
READ/Scroll Down key for 3 seconds and release.
6.Observe a Moving *on Display.
*
NOTE: If a “No Link” message No Link displays, cycle ignition key to
the OFF position for 10
seconds, then back ON and repeat “Reading Diagnostic Data.”
7. View Codes on Display
3 Codes9
NOTE: If there are no codes present, 0 Codes9 the tool will display “0
Codes” and proceed to
display MIL Status when | READ/Scroll Down is |
pressed. |
|
•To View Codes press and
release READ/Scroll Down key.
•If the code is a Pending Code a ,will be displayed.
P0443 9:
P0452 ,9:
8