Acu-Rite 1025 Select Measurement Units, Set Language, Placement for Maximum Accuracy, View Video

Select Measurement Units

To select between standard units (mph, ºF, etc.) or metric units (kph, ºC, etc.):

1. Press the up or down arrow buttons until “SET UNITS?” is displayed on the Selectable Category part of the display unit.

2.Press the “ ” button to set the unit preference.

3.Press the up or down arrows to select “STAND” for standard or “METRIC” for metric units.

4. Press the “ ” button to confirm your selection.

5. Next, you will see “WIND MPH”. Press the up or down arrows to select MPH, KPH, or KNOTS for wind speed units.

6. Press the “ ” button to confirm your selection.

Units are now set.

Set Language

To select between English (default) or French for the display unit language:

1.Press the up or down arrow buttons until “SET LANG?” is displayed on the Selectable Category part of the display unit.

2.Press the “” button to set the language preference.

3.Press the up or down arrows to select the desired language.

4.Press the “ ” button to confirm your selection.

Language is now set.

Note: Display unit reverts to English language when display unit runs out of power or is reset.

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product.

Display Unit Placement

Place the display unit in a dry area free of dirt and dust. To ensure accurate temperature measurement, place out of direct sunlight and away from heat sources or vents. Display unit stands upright for tabletop use or is wall-mountable.

5-in-1 Sensor Placement

The 5-in-1 sensor is designed to remain outdoors all year long. Choose an open location with no obstructions above or around the sensor for the most accurate measurements.

Important Placement Guidelines

Display unit and sensor must be within 330ft (100m) of each other.

MAXIMIZE WIRELESS RANGE

Place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.

PREVENT WIRELESS INTERFERENCE

Place both units at least 3ft (.9m) away from electronic devices (TV, computer, microwave, radio, etc.).

LOCATE AWAY FROM HEAT SOURCES

Position sensor away from heaters, air conditioners, chimneys, exhaust vents, asphalt and concrete (surfaces that radiate heat).

LOCATE AWAY FROM HUMIDITY SOURCES

Avoid installing the sensor near pools, spas, or other bodies of water. Water sources may impact humidity accuracy.

LOCATE AWAY FROM SPRINKLER HEADS

DO NOT install the sensor where it will be sprayed by a sprinkler system. This impacts rainfall measurement accuracy and may force water inside the sensor.

LOCATE AWAY FROM WIND & RAIN OBSTRUCTIONS

DO NOT mount the sensor with obstructions above it, as this will impact rainfall measurement. Consider a location that is a wide open area, with few structures around to ensure accurate wind speed and direction measurements.

Visit us online to view installation photos and
video, or learn more about AcuRite technology:
www.AcuRite.com/5in1	View Video

10 11