•Insert the encoder into the spar.
• Centertheencoderfromendtoendwiththespar.
• LockinplacebytighteningtheM4setscrews.
•Attachthebrackettothemachine.
• Alignthereadingheadmountingholeswiththebracketholes.
• Attachheadtobracket/Setlevelingscrews/Securefasteners.
•Tolocatethereadingheadbracket,attachittothereadinghead.
• Centertheaxisandmarkthebracketmountingholes.
• Removethebracket,drill/tapholesfor1/4-20(M6).
M4x8mmsetscrews
8-32x5/8”SHCS
(M4x16mm)
Do not tighten prior to adjusting
leveling set screws.
Reading head bracket
8-32x5/8”SHCS
(trim if necessary)
SENC 150 Spar Installation Procedure
•Slidethebracketsawayfromthereadinghead.
• Removethealignmentbracketsandsaveforfutureuse.
• Proceedtopage13,“CheckingYourInstallation”.
Alignment bracket
removal
Slidebracketsawayfromreadingheadandcable.
Twist45°
13
ACU-RITE
®
516291-21_Ve00_SENC_150.indd 15 10/22/2009 10:00:45 AM