Acumen Hydra-Alert Jr manual Overview, Clock Mode, Fluid Loss Mode, TEM/HUM Mode, Heat Index Mode

Overview

The Normal Modes in Hydra-AlertTMJR can be toggled in the following

sequence by pressing “MODE”.

	Press “MODE”
Clock Mode	Set Mode
Press “MODE”	Press “MODE”
Fluid Loss Mode	Exercise File Mode
Press “MODE”	Press “MODE”
TMP/HUM Mode	Free Training Mode
Press “MODE”	Press “MODE”
	Press “MODE”
Heat Index Mode	Stopwatch Mode

2.1 Clock Mode

Press "EL" to activate the NiteLite

Press & Hold"" to Turn On / Off

Daily Alarm

Press "MODE" to advance to Fluid

Loss Mode.

Note: => Daily Alarm => Turn On / Off Daily Alarm immediately

The Daily Alarm produces a 1-minute double short beep. (Press any button to stop it)

2.2 Fluid Loss Mode

● Press "EL" to activate

the NiteLite.

● Press "MODE" to advance

to TEM/HUM Mode.

2.3 TEM/HUM Mode

● Press "EL" to activate the NiteLite.

● Press " MODE " to advance to Heat Index Mode.

2.4 Heat Index Mode

● Press "EL" to activate the NiteLite.

● Press " MODE " to advance to Stopwatch Mode.

Note: When the Heat Index is shown and its current value is at a very high level, the watch will alert you by switching between the Heat Index values and warning messages. The warning messages include

Care, Ultra Care, Danger and Ultra Danger (Refer to page 8 for

additional details).

56