Adaptec 44300 To update a single HostRAID controller, To update multiple HostRAID controllers

Appendix D: Using the Adaptec Flash Utility for DOS ● 86

5Update the flash using the instructions suitable for your requirements:

● To update a single HostRAID controller:

AFU UPDATE /C <cont_number>

Where <cont_number> is the number of the RAID controller whose firmware you are updating. For example, to upgrade Controller 0, type AFU UPDATE /C 0

●To update multiple HostRAID controllers:

AFU UPDATE /C <cont_number_a>,<cont_number_b>

Where <controller_number_a> and <controller_number_b> are the numbers of the Adaptec RAID controllers whose firmware you are updating. For example, to upgrade controllers 0, 2, and 3, type AFU UPDATE /C 0, 2, 3.

●To update all HostRAID controllers simultaneously:

AFU UPDATE /C all

Note: The UFI file identifies the RAID controllers, so you don’t have to worry about flashing the wrong controller.

6When prompted, insert the first firmware disk into your floppy disk drive. The AFU reads the first disk.

7When prompted, remove the first firmware disk and insert the second firmware disk into your floppy disk drive.

8Repeat Step 7 until the flash update is complete.