Adaptec 48300, 58300 Installing with NetWare, Continue with Managing Your Storage Space on page

Chapter 7: Installing the Driver and an Operating System l 45

Installing with NetWare

Note: NetWare does not support drive enclosures with port multipliers but supports eSATA drives.

You will need your NetWare Installation CD to complete this task. To install the driver when installing NetWare:

1Restart your computer, then install NetWare. (For instructions, refer to your NetWare documentation.)

To be able to load additional drivers later, select Manual install mode during the first part of the installation.

2Click Continue to load additional drivers:

a Select Modify when the storage adapters are displayed.

b Select Storage Adapters, then press the Insert key twice to add an unlisted driver from the floppy disk.

3When the Device Types screen displays, check the Storage adapters list, then select Modify to add another driver.

4Select Storage Adapters, then press Enter. All recognized controllers are displayed.

5If necessary, remove the default HostRAID driver (<driver-name>.ham).

6Press the Delete key to remove it.

7Press Insert to add another driver. The available drivers are displayed.

8Insert the driver floppy disk.

9Press the Insert key to scan the floppy disk drive.

Once the driver is selected, the Parameter screen is displayed.

10From the lower window menu, select Continue, then press Enter.

If the driver installation process fails, the server console is displayed so you can see the cause of the failure.

To modify disk partitions, apply hot fixes, or perform volume maintenance, refer to your NetWare documentation.

11Continue with Managing Your Storage Space on page 50.