Connecting a Power Source
45
Connecting a Power Source
The 2Gb SANbloc enclosure supports dual AC power
supplies. Only one power supply is required for normal
operation. However, a second, optional power supply may be
added to provide a redundant power system. Each power
supply has its own AC power inlet.
CAUTION: Power supply cords shall have conductors with a
cross-sectional area not less than 4mm2. This cross-sectional area
corresponds to a minimum 10AWG wire.

Connecting an AC

Power Source 1Ensure all cables have been attached as described in the
preceding sections.
2Attach the AC power cords to the power supplies and turn the
power supply switches to the On (-) position (see Figure 3-5).
Figure 3-5 Attaching the AC power cords
WARNING: This equipment must be connected to an earthed
mains socket outlet. Ensure the power cabling provides earthing
continuity to the equipment.
1
2
1
2
0
I
0
I
Insert Power cords into
power connectors