PREPARING FOR CONFIGURATION 3 AND MANAGEMENT

You configure the Megabit Modem 310F and 320F using an ASCII terminal or PC running a terminal emulation program. This chapter provides the set up procedures.

CONNECTING A TERMINAL

Connect the modem to an ASCII terminal or PC running a terminal emulation program:

1Plug the console adapter into the standard 9-pin COM port on the terminal or PC and tighten the captive screws until they are snug. (Skip this step if you are using an ASCII terminal that has an RJ-45 jack.)

2Connect one end of the gray console cable to the adapter or ASCII terminal RJ-45 jack.

3Connect the other end of the gray console cable to the modem RS-232 RJ-45 port.

Megabit Modem 310F or 320F

PC

RS-232 port

10BASE-T

RS-232

DSL

POWER

Megabit Modem 310F and 320F User Manual

9