Configuring the Terminal

CONFIGURING THE TERMINAL

Whether you are using an ASCII terminal or PC running a terminal emulation program, such as Hyperterminal, you must configure the communication settings as indicated in this section, including designating the connection type and communications port. See your terminal emulation program or operating system documentation for instructions.

1Configure these communication settings:

•9600 to 19,200 baud

•no parity

•8 data bits

•1 stop bit

•no flow control

2Set the terminal emulation mode to ANSI.

LOGGING ON AND NAVIGATING THE INTERFACE

Using the management interface, you can manage both the Megabit Modem 310F and 320F. The header on each screen identifies the modem you are currently managing:

•ATU-C is the Megabit Modem 310F.

•ATU-R is the Megabit Modem 320F.

Logging On to the Local Modem

Through the Megabit Modem 310F (ATU-C) System Configuration menu, you can disable the console port on the Megabit Modem 320F (ATU-R).

Use an ASCII terminal or PC running a terminal emulation program to access the management interface.

1Press the SPACEBAR several times to activate the autobaud feature and to display the Logon Password screen.

10

Megabit Modem 310F and 320F User Manual