Enter the IP address for the PC that is assigned to this session.

Configuring PPP over ATM Sessions

PRELIMINARY

 

 

Defining User Assignment Parameters

You can map your PC to only one of the three sessions at a time. If you want to use a different session, select User Assignment on the PPP over ATM WAN Configuration page and move the user assignment to another session.

1Do the following to define Users’ Assignments:

 

A

‹

Enter the Service Name you entered for the session shown in field ‹ on page 36.

Œ Enter the User’s IP Address for the LAN-side user that you assign to this session.

(If the PC is mapped to one of the other two sessions, you must remove itRYfrom that

session to map it to this session.)

 

N

 

 

 

 

 

• Displays the Service Name and User’s IP Address for the configured session.

 

 

 

 

I

 

 

 

 

 

M

 

 

 

 

 

 

 

 

 

 

‹

 

 

I

 

 

Œ

 

EL

 

 

 

 

 

 

 

 

•

PR

 

 

 

 

 

 

 

2 Click

Add to accept a user assignment you entered in Step 1.

 

Delete a user assignment as follows:

1 Highlight the user assignment listed in • (see figure above) then click Delete. (When you highlight the user assignment, it automatically displays in the Service Name and User’s IP Address fields.)

2 After adding or deleting all user assignments, click Done to return to the EasySession page.

38

Megabit Modem 500L Installation Manual