PRELIMINARYChapter 6: Configuring Sessions

Configuring the LAN

1 Click EasySession on the Main Menu to access the EasySession page.

2 At the top of the EasySession page, click Edit next to LAN Configuration to display the

PPP Over ATM LAN Configuration page.

 

3 Do the following to configure the LAN:

 

 

 

 

 

 

 

 

 

Enter the IP Address and IP Net Mask (subnet mask) for the modem Ethernet

 

 

 

10/100BASE-T LAN port. The IP address will not take effect, however, until the

 

 

modem is reset.

 

 

 

 

 

 

 

 

 

 

Œ Select DHCP Enable if you want to enable the modem to act as a DHCP server to

 

 

 

automatically assign IP addresses to devices on the LAN. If you enable DHCP,

 

 

 

ensure that all devices on the LAN have the TCP/IP stack set to Obtain an IP address

 

 

automatically (see page 18).

 

 

RY

 

 

N

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I

 

 

 

 

 

 

 

 

 

 

 

M

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Œ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ž

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EL

 

 

 

 

 

 

 

 

 

PR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Megabit Modem 500L Installation Manual

39