SECTION VII
DATA LABEL INFORMATION
When contacting American Dryer Corporation, certain information is required to ensure proper service/parts information from ADC. This information is on the data label located on the left side panel behind top/access control door. When contacting ADC, please have the model number and serial number available.
1.MODEL NUMBER – Describes the size of the dryer and the type of heat (gas, electric, or steam).
2.SERIAL NUMBER – Allows the manufacturer to gather information on your particular dryer.
3.MANUFACTURING CODE NUMBER – The number issued by the manufacturer, which describes ALL possible options on your particular model.
4.TYPE OF HEAT – This describes the type of heat for your particular dryer, gas (either natural gas or liquid propane [L.P.] gas), electric, or steam.
5.HEAT INPUT (for GAS DRYERS) – This describes the heat input in British thermal units per hour (Btu/hr).
6.ORIFICE SIZE (for GAS DRYERS) – Gives the number drill size used.
7.ELECTRIC SERVICE – This describes the electric service for your particular model.
8.GAS MANIFOLD PRESSURE (for GAS DRYERS) – This describes the manifold pressure taken at the gas valve tap.
113202 - 10 | www.amdry.com | 41 |
