selected input, the monitor will switch the input to that signal.

In the case of only one signal being present at either input, the monitor automatically detects and displays that signal.

Priority setting

 

Performance

 

 

 

1

(SIGNAL 1)

2

(SIGNAL 2)

If signals from both inputs are present, the monitor gives preference to Signal 1 in the following cases.

●When the power of the monitor is turned ON.

●When the signal input to Signal 1 is changed even if active input was Signal 2.

If signals from both inputs are present, the monitor gives preference to Signal 2 in the following cases.

●When the power of the monitor is turned ON.

●When the signal input to Signal 2 is changed even if active input was Signal 1.

Manual

The monitor will not detect signals automatically in this mode. Select the active input by pressing the Input Signal Selection Button on the monitor's control panel.

●When the "1" or "2" is selected, the power saving mode of the monitor activates only if both PCs are in power saving mode.