Manuals / Brands / Computer Equipment / Computer Monitor / ADC / Computer Equipment / Computer Monitor

ADC L997 Monitor, Power Indicator, Power Indicator Setting, EIZO Logo Appearing Function

1 56

Download 56 pages, 828.6 Kb

[Procedure]

1.Select <Off Timer> in the ScreenManager <Others> menu.

2.Select "Enable" and press the Right and Left buttons to adjust the "On Period" (1 to 23 hours).

[Off Timer System]

PC				Monitor		Power Indicator

On Period (1H - 23H)		Operation				Blue

Last 15 min. in "On period"		Advance Notice*				Blue Flashing
Last 15 min. in "On period"		1				Blue Flashing
		1


"On period" expired		Power Off				Flashing yellow slowly

*1 Advance notice (Power Indicator flashing blue) will be given 15 minutes before the monitor automatically enters the "Power Off" mode. To delay entering the "Power Off" mode, press the Power button during the advance notice period. The monitor will continue to operate for an additional 90 minutes.

[Power Resumption Procedure]

Press the Power button to return to a normal screen.

●The off timer function works while the PowerManager is active, but there is no advance notice before the monitor's power is turned off.

Power Indicator Setting

Light off the power indicator. This function is available for the multiple panels settings.

[Procedure]

1.Select <Power Indicator> in the ScreenManager <Others> menu.

2.Select "Disable".

EIZO Logo Appearing Function

When switching on the Power button on the control panel, the EIZO logo is displyed for a while. If you desire to display or undisplay this logo, use this function. (Default is logo appearing.)

[To undisplay]

Turn off the monitor's power by the Power button, then hold down the Enter button once again and turn the power back on.

[To display]

Turn off the monitor's power by the Power button, then hold down the Enter button once again and turn the power back on.

Contents

Page Page SAFETY SYMBOLS WARNING CAUTION 1. Introduction 1-1.Features 1-2.Package Contents 1-3.Controls & Connectors Rear Page 2. CABLE CONNECTION 2-1.Before Connecting 2-2.Connecting the Signal Cable Digital Input 2.Plug the power cord into the power connector on the rear of the monitor 4. Plug the other end of the power cord into a power outlet 2-3.Connecting Two PCs to the Monitor Connecting Examples Selecting the Active Input The Priority Input Signal Performance 3. ScreenManager 3-1.How to use the ScreenManager 3-2.ScreenManager Adjustments and Settings 3-3.FineContrast 3-4.Useful Functions Monitor Power Indicator Power Indicator Setting EIZO Logo Appearing Function 4. ADJUSTMENT 4-1.Screen Adjustment 3. Adjust by using <Screen> menu in the ScreenManager (1) Vertical bars appear on the screen →Use the <Clock> adjustment (2) Horizontal flickering, blurring or bars appear on the screen →Use the <Phase> adjustment 4-2.Displaying Low Resolutions 4-3.Color Adjustment Range Adjustment Adjustment Items Icons FineContrast Modes Text 4-4. Power-saveSetup Page Page 5. ActiveShot Function 5-1.Operation 5-2.Sub Window Settings <Standard> Mode <Clip> Mode <Standard> Mode To select the size →Select <Window Size To adjust the position →Select <Window Position <Clip> Mode Setting up the Clipping Area →Select <Clip Area> icon to set up the clipping area 5-3.Settings using the Control Buttons 6. ActiveRotationII Function Page Page Page 8. ATTACHING AN ARM Page 9. TROUBLESHOOTING 3.Display position is incorrect 4.Screen image is smaller or larger than the actual screen images 5.Vertical bars of distortion appear 6.The characters and images have several vertical bars on their right side 7.Horizontal bars of distortion appear 11.Afterimages appear 12.The screen has defective pixels (e.g. slightly light or dark) 13.Fingerprints remain on the screen 14.The noise appears on the screen 15.The <Smoothing> cannot be selected 23. USB function cannot be setup 10. CLEANING 11. SPECIFICATIONS Default settings Analog input Digital input Beeper settings Dimensions Pin Assignment Signal Pin No Page 12. GLOSSARY sRGB Temperature TMDS VESA DPMS APPENDIX/ANHANG/ANNEXE Preset Timing Chart for Analog input Timing-Übersichtenfür Analog Eingang Synchronisation des Signaux pour Analog numerique Dot Clock Sync Polarity Frequencies Digital Input Digitaler Eingang Entrée numérique Page Congratulations Why do we have environmentally labelled computers What does labelling involve Environmental Requirements Flame retardants Cadmium Mercury CFCs (freons) Lead Page Hinweis zur Ergonomie : Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Recycle Auskunft Recycling Information for customers in Switzerland: Recycling-Informationfür Kunden in der Schweiz: Renseignements de recyclage pour les clients en Suisse: Recycling Information for customers in USA: Återvinnings information för kunder i Sverige: