ADC L997 23. USB function cannot be setup

21.Frequency does not change after installing "Monitor information file" in the attached utility disk on Windows 98/2000/Me/XP.

22.PC is hung up. / The peripherals connected to the downstream ports do not operate.

23. USB function cannot be setup.

●Use the graphics board's utility software to change the input signal frequency.

●Check that the USB cable is correctly connected.

●Check the downstream ports by connecting the peripherals to other downstream ports. If the problem is solved by doing this, contact an EIZO dealer. (For details, refer to the manual of the PC.)

●Try executing the following method.

●Restarting the PC

●Connecting the PC and peripherals directly

If the problem is solved by doing this, contact an EIZO dealer.

●Check that the USB cable is correctly connected.

●Check that the PC and OS are USB compliant. (For verification of USB support, consult the manufacturer of each system.)

●Check the PC's BIOS setting for USB. (For details, refer to the manual of the PC.)

Contents

Page Page SAFETY SYMBOLS WARNING CAUTION 1. Introduction 1-1.Features 1-2.Package Contents 1-3.Controls & Connectors Rear Page 2. CABLE CONNECTION 2-1.Before Connecting 2-2.Connecting the Signal Cable Digital Input 2.Plug the power cord into the power connector on the rear of the monitor 4. Plug the other end of the power cord into a power outlet 2-3.Connecting Two PCs to the Monitor Connecting Examples Selecting the Active Input The Priority Input Signal Performance 3. ScreenManager 3-1.How to use the ScreenManager 3-2.ScreenManager Adjustments and Settings 3-3.FineContrast 3-4.Useful Functions Monitor Power Indicator Power Indicator Setting EIZO Logo Appearing Function 4. ADJUSTMENT 4-1.Screen Adjustment 3. Adjust by using <Screen> menu in the ScreenManager (1) Vertical bars appear on the screen →Use the <Clock> adjustment (2) Horizontal flickering, blurring or bars appear on the screen →Use the <Phase> adjustment 4-2.Displaying Low Resolutions 4-3.Color Adjustment Range Adjustment Adjustment Items Icons FineContrast Modes Text 4-4. Power-saveSetup Page Page 5. ActiveShot Function 5-1.Operation 5-2.Sub Window Settings <Standard> Mode <Clip> Mode <Standard> Mode To select the size →Select <Window Size To adjust the position →Select <Window Position <Clip> Mode Setting up the Clipping Area →Select <Clip Area> icon to set up the clipping area 5-3.Settings using the Control Buttons 6. ActiveRotationII Function Page Page Page 8. ATTACHING AN ARM Page 9. TROUBLESHOOTING 3.Display position is incorrect 4.Screen image is smaller or larger than the actual screen images 5.Vertical bars of distortion appear 6.The characters and images have several vertical bars on their right side 7.Horizontal bars of distortion appear 11.Afterimages appear 12.The screen has defective pixels (e.g. slightly light or dark) 13.Fingerprints remain on the screen 14.The noise appears on the screen 15.The <Smoothing> cannot be selected 23. USB function cannot be setup 10. CLEANING 11. SPECIFICATIONS Default settings Analog input Digital input Beeper settings Dimensions Pin Assignment Signal Pin No Page 12. GLOSSARY sRGB Temperature TMDS VESA DPMS APPENDIX/ANHANG/ANNEXE Preset Timing Chart for Analog input Timing-Übersichtenfür Analog Eingang Synchronisation des Signaux pour Analog numerique Dot Clock Sync Polarity Frequencies Digital Input Digitaler Eingang Entrée numérique Page Congratulations Why do we have environmentally labelled computers What does labelling involve Environmental Requirements Flame retardants Cadmium Mercury CFCs (freons) Lead Page Hinweis zur Ergonomie : Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Recycle Auskunft Recycling Information for customers in Switzerland: Recycling-Informationfür Kunden in der Schweiz: Renseignements de recyclage pour les clients en Suisse: Recycling Information for customers in USA: Återvinnings information för kunder i Sverige: