<Standard> and <Clip> modes are available for displaying the Sub window (refer to following figures) for displaying the Sub window.

The mode is set on the <Picture in Picture> menu of ScreenManager.

[Example]

<Standard> Mode

Displaying the screen image in full screen with reducing the image size.

<Clip> Mode

Displaying a certain part of the screen image without reducing the image size.

<Standard> Mode

Displaying the screen image in full screen with reducing the image size in the Sub window. Select <Standard> mode on <Picture in Picture> menu of ScreenManager.

To select the size→ Select <Window Size>.

This sets the window size from "Large" (approx. 1/4), "Medium" (approx. 1/6) or "Small" (approx. 1/16).

Select the size of the Sub window.

●After selecting the size, the actual Sub window size depends on the input signal.

To adjust the position→ Select <Window Position>.

This adjusts the position of the Sub window.

Select <Window Position> and adjust the position by using the up, down, right and left buttons.

To set the Contrast→ Select <Window Contrast>.

This controls the brightness for the each color (red, blue and green) at the same time.