Addonics Technologies HDU11SITDR manual Device Info, System Info, Fast Copy, Auto Start Drive

Device Info

This option is used to display the details of all hard disks connected to the copy controller.

10-06. Setup

Device Info

Press ENT and the LCD will display each hard disk' information in order as shown below.

0Source CH: 0 Hitachi 232.9GB

System Info

This option displays system information.

10-07. Setup

System Info

Fast Copy

This option displays Fast Copy. Fast Copy only copies data on the source drive to the target drives. Currently only supports FAT, FAT32, NTFS, HFS, Ext2 and Ext3 partitions.

10-08. Setup

Fast Copy

Press ENT and the LCD will display the following info. Use the Up and Down arrow keys to choose whether fast copy is on or o￿. (This function currently only e￿ective in FAT, FAT32, NTFS, HFS,

Ext2 and Ext3 partitions.)

Fast Copy

On

Auto Start Drive

This option is used to display to copy automatically once y ou insert HDD on target port.

10-09. Setup

Auto Start Drive

Press ENT to enter the following ￿gure. The default is O￿. Use the Up and Down arrow keys to choose 1-11.

Auto Start Drive

O￿

Auto Start Timer

This option is used to set the period of time when the duplicator starts copying automatically once you insert HDD on target port. Default is set at OFF, use the

arrows to choose time.

10-10. Setup Auto Start Timer

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/