Addonics Technologies HDU11SITDR manual Load Default, Copy HPA, Burn

Load Default

Press ESC to return to the main menu then use the ENT button to select. This function resets all settings to their factory default. This function helps the system recover from errors caused by an illegal operation.

11-07.Adv Setup

Load Default

Press ENT to enter the following screen. Use the Up and Down buttons to con￿rm reset to factory defaults.

Load Default

Con￿g? Yes

If Load Default OK, this will be displayed on the LCD as shown below.

Load Default

Ok

Copy HPA

If this function is set to "ON", the system will completely copy the data in a source HDD's host protected area.

11-08. Adv Setup

Copy HPA

The default is "OFF". Use the ENT , Up and Down buttons to change this to "On".

Burn In

This function is used to burn test the system reliability.

11-09. Adv Setup

Burn In

Press ENT to enter the following screen.

Burn In Mode

Copy & Compare

Use the Up and Down buttons to choose Compare, Async Copy & Cmp and Async Compare, then press ENT to con￿rm.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/