CardBus / PCMCIA setting
The Addonics CardBus PCMCIA card has an option switch can allow you to choose using either PCMCIA mode or CardBus mode. The switch position is as follows:
CardBus PCMCIA
Front view
Factory default setting is CardBus mode
Side View
Cardbus and PCMCIA selection switch.
CardBus mode – move the switch to the side with the DOT indicator
CardBus mode supports WIN 95/98/ME/2000 and XP only. For DOS, WIN 3.1x and WIN NT, the switch must be set in PCMCIA mode.
For Power Installation please refer to Diagram 2 from page5
Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0 | 7 |
