The HPM-XU Port Multiplier
Port 2 | Port 0 Port 3 | Port 4 |
|
|
Port 1 | eSATA |
| ||
| P0 | J1: | ||
|
| P1 | ||
|
| P2 | Activity LED | |
Buzzer |
| P3 | ||
| P4 |
| ||
Alarm |
| P0 |
| |
| eSATA |
| ||
|
| P1 | J3: | |
|
| P2 | ||
|
| P3 | Error LED | |
Floppy |
| P4 |
| |
|
|
| ||
Power |
|
|
| |
Connector |
|
|
| |
USB 3.0/2.0 Host Port | Dip Switch | RAID Setting Button | ||
eSATA Host Port (Port 5) | ||||
|
|
| ||
Resetting the RAID Mode
NOTE: This procedure destroys all RAID data. It should not harm individual drives or their contents; however, creating or running backups of all data is strongly recommended before proceeding.
1.Power down the unit and set the dip switch to the factory default setting (all switches OFF).
2.While holding the SET button with a ballpoint pen, turn the unit on. A long beep will sound from the Port Multiplier. The SET button may be released once the long beep stops.
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |
