Step 9. Create the user and group files.
For default user IDs and group IDs, refer to the table in the System Parameters Checklist section on page
The "vsadm" user and "vsadmin" group must exist before the installation can continue. You must create them now if you have not already done so.
If you are installing from a
Press <RETURN> to
Step 10. Type y (yes) and the VolServ license string if you wish to add a new library or change an existing one.
If you do not type the license string now or you want to change it later, use the
$VS_DIR/util/change_license utility. For instructions on using this utility, refer to the Updating the License String section on page
Please enter the license strings that were delivered with the VolServ software. If for some reason you did not receive any license strings, please call the ADIC TAC at:
Have this number ready: 80b06072
Note: If you are doing a patch and you have added new archives, you will need to enter your new license strings in order to activate support for them.
You can skip this section now and enter the license later.
Do you wish to enter the license strings now (<y> or n) ? n When you are ready to enter the license strings, execute the following:
[/scratch/apps]/volserv/util/change_license
Setting VolServ permissions...done.
Copying Linter RDBMS files to |
|
[/scratch/apps]/volserv/linter... | Done. |
Reloading VolServ 5.0.0 Database... | Done. |
The home directory of the linter database
is [/scratch/apps]/volserv/linter. The LINTER_DIR environment variable will be set to this value.
Commencing upgrade of the VolServ 5.1.0 database.
The upgrade of the 5.1.0 Database was successful.
Taking Database checkpoints...Done.
VolServ Version 5.1 — | Page 11 of 14 |
