•SGI IRIX support for 6.5.15 - 6.5.17.
•Linter database upgrade to version 5.9.15.5.
Fixed Problems
Between VolServ 5.0 and VolServ 5.1, ADIC changed the system it uses to track Change Requests (CRs). Therefore, if two numbers have been associated with a CR, the first number in the Change Requests column represents the new tracking system, and the number within parentheses represents the old tracking system.
The following table describes the problems that have been fixed in this release.
Operating | Change | Description | |
System | Requests | ||
| |||
|
|
| |
IRIX | 4255 | The Eject and Enter lists fail to print from a console. | |
| (08627) |
| |
|
|
| |
| 4322 | The World Wide Name (WWN) device format is not handled correctly. | |
| (13009) |
| |
|
|
| |
Solaris | 4316 | After cycling the AMU software, the barcode is enabled, but the Vary Archive | |
| (11575) | Component display still shows the status as offline. | |
|
|
| |
| 5723 | From the Vary Archive Components screen, the EIF, Storage Unit, and Barcode | |
| (13150) | Reader cannot vary on or off. | |
|
|
| |
All | 3875 | The vsmountstat command cores with SEGV if given a | |
| (13760) |
| |
|
|
| |
| 4250 | The vsarchiveqry command hangs. | |
|
|
| |
| 4251 | On the Enter and Eject screens on the AML console, the media type of the EIF | |
| (07875) | ports displays in numeric rather than in textual format. | |
|
|
| |
| 4256 | AML libraries do not support LTO drives. | |
| (09564) |
| |
|
|
| |
| 4307 | VolServ 5.0 does not support mixed media for ADIC libraries. | |
| (11049) |
| |
|
|
| |
| 4322 | The program vswin exits if invalid data is entered into the drive slot field when the | |
| (13275) | drive is associated with an archive. | |
|
|
| |
| 5715 | Moving media fails when moving it from one archive into a shelf or from a shelf into | |
|
| another archive. | |
|
|
| |
| 5742 | The ArcDisp cores when allocated memory is incorrectly released into it. | |
|
|
|
Known Problems
Between VolServ 5.0 and VolServ 5.1, ADIC changed the system they use to track Change Requests (CRs). Therefore, if two numbers have been associated with a CR, the first number in the Change Requests column represents the new tracking system, and the number within parentheses represents the old tracking system.
Page 2 of 14 | VolServ Version 5.1 — |
