![](/images/new-backgrounds/1269353/26935367x1.webp)
LCD Messages (DS9400D/L, DS9700D and DS9800D only)
The following table describes the messages displayed by the LCD during normal operation:
Drive Operating Condition
LCD Message
No tape in drive.
When loading or unloading a tape.
“type” = 4000 OMX (DS9400D/L), 7000 OMX (DS9700D) or 8000 OMX (DS9800D).
During the loading process the display may toggle between “Loading >>>” and “Calibrating >>>”.
Note
While loading the tape, the drive will enter a false Ready Mode condition for a short period. During this false state the Tape In Use LED will continue to blink. Do not attempt any operations while the LED is blinking.
When tape is unloaded.
Continued on next page.
22 | Operation and Maintenance |