ADIC DS9000 Series manual Drive Operating Condition LCD Message

Drive Operating Condition

LCD Message

When tape is loaded.
	“type” = 4000 OMX (DS9400D/L), 7000 OMX (DS9700D) or
	8000 OMX (DS9800D).
	“Compressed” if compression mode enabled or “Standard” if
	compression mode disabled.
	“15/30 GB” is drive dependent. “15/30 GB” = DLT2000XT,
	“20/40 GB” = DLT4000, “35/70 GB” = DLT7000, and “40/80 GB
	= DLT8000.
	This is the normal “Ready Screen”.
If write-protected tape is inserted.	During loading of a write-protected tape, the display will change
	from:
	“Loading >>>” to “Write Protected Tape Inside Drive”, the LCD
	back-light will toggle on/off and an audible alarm will sound.

Write-protected tape fully loaded.

“WPT” = Write Protected Tape in unit.

“WPT” will toggle to “GB” and back to “WPT” and continue toggling until next drive action.

Continued on next page.

Operation and Maintenance 23