61200214L1-1 IQ Probe User Manual 67
Chapter 9. System Configuration
ENTERING LETTERS USING THE FRONT PANEL
Configuring the Read/Write Community names requires the
entry of letters rather than numbers. When configuring the unit
using the front panel, special steps must be taken in order to
perform these entries. The following example of entering the
Write Community name illustrates this procedure:
1. Select WRITE COMMUNITY from the System configuration
menu.
2. Press the up arrow to scroll to the desired character.
3. Press Enter.
4. Repeat steps 2 and 3 until all characters have been selected.
5. Press the Enter key to complete the entry.