ADTRAN A2.03 manual

Models: A2.03

1 14
Download 14 pages 11.96 Kb
Page 10
Image 10

connect isdn-group 2 modem-passthrough t38

Allows T.38 faxing

rtp delay-mode adaptive codec-group "7xx Options"

!

voice trunk T04 type analog supervision loop-start description "FXO2"

caller-id

caller-id-override number-inbound 1231234 if-no-cpn trunk-number 7154222

connect fxo 0/2 modem-passthrough rtp delay-mode adaptive codec-group "7xx Options"

!

!

voice grouped-trunk "SIP GROUP"

This section associates the SIP trunk with its routing and number options no description

trunk T01

Shows which trunk to associate with the group accept 6739 cost 0

Will accept this number (6739) bound to trunk at route weight cost of 0 (best), should be set to PRI number

accept $ cost 0

Will accept any number bound to SIP trunk T01 at weight cost 0, forces all calls to go out SIP trunk first (so station calls go to IC server first) reject 976-XXXX

reject 1-900-NXX-XXXX reject 1-976-NXX-XXXX

Will not allow any 900 or 976 numbers to be dialed or accepted

!

!

voice grouped-trunk FXO description "FXO Ports" trunk T02

trunk T04 accept 911 cost 0

This forces 911 calls to go out the FXO, rather than the PRI, for emergencies, this may be adjusted according to business needs accept $ cost 400

This assures that calls can use the FXO port to go outbound, but will accept 7154222 cost 0

This routs calls to this number out the FXO port specifically, this may or may not fit the business plan, but can be useful in some circumstances (e.g. fax line)

reject 976-XXXX reject 1-900-NXX-XXXX reject 1-976-NXX-XXXX reject 6739

This will cause any calls bound for the PRI not to go through this FXO group

!

!

Page 10
Image 10
ADTRAN A2.03 manual