Chapter 3. Operation

NXT1 HSSI

OPTION MODULE

The NxT1 HSSI/V.35 Module system controller automatically detects the presence of the NxT1 HSSI Option Module when it is installed in the system (listed as NXT1 HSSI). To see the menus for the NxT1 HSSI Option Module via the terminal menu, use the arrow keys to scroll to the MODULES menu and press <Enter> to access the module choices. V.35 is available when us- ing the optional adapter cable (ADTRAN P/N 3125I081). Some of the fol- lowing menus do not apply when configured for V.35 mode.

INFO

Read security: 5

 

Provides information about the module part number, serial number and as-

 

sembly revision.

 

PART NUMBER

 

Read security: 5

 

Displays the part number of the module.

 

SERIAL NUMBER

 

Read security: 5

 

Displays the serial number of the module.

 

ASSEMBLY REVISION

 

Read security: 5

 

Displays the assembly revision.

 

FIRMWARE REVISION

 

Read security: 5

 

Displays the current firmware revision of the NxT1 HSSI Option Module.

T1 ENABLE

Write Security: 3; Read Security: 5

 

Configures the NxT1 HSSI Option Module to activate the module’s four

 

built-inT1 interfaces. When configuring the module to use more than four

 

T1s from other installed T1/T3 modules, this field should be set to

 

DISABLED.

The NxT1 HSSI/V.35 Module’s four built-in T1 interfaces are activated collectively as a bundle. Setting the T1 ENABLE menu to ENABLED allows you to map from any/all of the built-in T1 ports to the HSSI interface. Setting the T1 ENABLE menu to DISABLED requires ALL of the T1s mapped to the HSSI interface to be from other installed T1/T3 modules.

32

NxT1 HSSI/V.35 Module User Manual

61200771L1-1

Page 32
Image 32
ADTRAN NxT1 HSSI/V.35 Sembly revision, Displays the part number of the module, Displays the serial number of the module