Appendix A. Dedicated Maps Configuration
S
This DS0 is used in the switched DIAL PLAN and conflicts with this connection.
N
This DS0 is already used in this DEDICATED MAP.
N
This DS0 is already used in this DEDICATED MAP and conflicts with this connection.
T1 TROUBLE CODE SERVICE
Sets known values in the signaling bits and the data field for outgo- ing DS0s which are
The trunk conditioning process consists of a 2.5 second transmis- sion (indicating call termination), followed by a continuous trans- mission signaling the final condition as chosen by the user. This selection is only valid for T1 ports having RBS set to ON.
This option defines to the NxT1 HSSI/V.35 Module the type of sig- naling being used on the trunk: E&M, LS/GS Network or User, SW56, or Custom.
T1 TROUBLE CODE VALUE
Displays the Hex value of the 2.5 second pre alarm transmission.
NxT1 HSSI/V.35 User Manual | 45 |
