Chapter 3. Operation
30 NxT1 HSSI/V.35 Module User Manual 61200771L1-1
installing modules by simply specifying the module that you want to install
in each slot.
MENU Displays additional status and configuration menus for the selected
module. (To access the submenus for this item, use the arrow keys to
scroll to the MENU column for the module you want to edit, and press
Enter.) For detailed information on each submenu item, see the section
Modules/Menu on page 31.
ALARM Read security: 5
Displays an alarm condition on the NxT1 HSSI/V.35 Module. Press Enter in
this field to activate the menu.
TEST Read security: 5Displays test name if the NxT1 HSSI/V.35 Module is executing a test. Press
Enter in this field to activate the menu.
STATE Displays module status as either ONLINE of OFFLINE. Even though a module
is physically installed, it must be marked as onlin e for it to be considered an
available resource. This field allows an installed module to be marked as of-
fline, which may be useful in system troubleshooting. If you choose OFFLINE,
the module will not be in alarm condition, but will display OFFLINE.
STATUS This read-only field provides status information on the NxT1 HSSI/V.35
Module. The following messages may display:
ONLINE The module is enabled, and is responding to the system controller’s status
polls. This is the normal response of the system.
NO RESPONSE The module is enabled, but is not responding to the system controller’s status
polls. This response indicates either a problem in the system or that the mod-
ule is not installed.
TYPE automatically displays the name of an installed module. If you want to change this field to
a different type of module, you must set TYPE to EMPTY before selecting the other module.
Once a module is installed, STATE must be set to ONLINE in order for the ATLAS 800 Series unit
to use the module for any data bandwidth.