“Device Ready”
The ADAM-4570/ADAM-4571/EDG-4504 is ready to be configured and is now waiting for acknowledgement from the device.
“Lost Connection from the Device”
Due to device shut down or network failure, the configuration utility has lost connection after 5 seconds.
“Fail to apply this setting to the device”
Specific settings are not accepted by ADAM-4570/ADAM- 4571/EDG-4504.
“The device fails to respond”
The connected device does not respond.
“Fail to reset the device”
Fail to reset the ADAM-4570/ADAM-4571/EDG-4504.
3.3.1 Connection Diagnostic
When you complete the configuration of your ADAM-4570/ ADAM-4571/EDG-4504s, you can follow the steps to check if the ADAM-4570/ADAM-4571/EDG-4504 connects to net- work or not.
1.Execute the Microsoft DOS program.
2.Execute “PING” command and type your IP address of ADAM-4570/ADAM-4571/EDG-4504. If ADAM-4570/ ADAM-4571/EDG-4504 connects to your network, it will display in the screen. If the ADAM-4570/ADAM-4571/ EDG-4504 cannot be pinged, you will need to ask someone
Chapter 3: Installation and Configuration 49
