Compaq 510, 511, 515 manual Security Menu, Diagnostics Menu

Computer Setup

Security Menu

✎Some of the menu items listed in this section may not be supported by your computer.

	Select	To do this
	Setup BIOS Administrator Password	Set up a BIOS administrator password.
	User Management (requires a BIOS administrator	■ Create a new BIOS user account.
	password)	■ View a list of ProtectTools users.
	Password Policy (requires a BIOS administrator	Revise password policy criteria.
	password)
	HP SpareKey	Enable/disable HP SpareKey (disabled by default).
	Always Prompt for HP SpareKey Enrollment	Enable/disable HP SpareKey enrollment (disabled by default).
	Allow Reset of HP ProtectTools security keys	Enable/disable reset of HP ProtectTools security keys.
	Change Password	Enter, change, or delete a BIOS administrator password.
	HP SpareKey Enrollment	Enroll or reset HP SpareKey, which is a set of security questions and
		answers used if you forget your password.
	DriveLock Passwords	■ Enable/disable DriveLock on any computer hard drive (enabled by
		default).
		■ Change a DriveLock user password or master password.
		✎ DriveLock settings are accessible only when you enter Computer
		Setup by turning on (not restarting) the computer.
	Automatic DriveLock	Enable/disable Automatic DriveLock support.
	Disk Sanitizer	Run Disk Sanitizer to destroy all existing data on the primary hard drive
		or the drive in the upgrade bay.
		Ä If you run Disk Sanitizer, the data on the selected drive is
		destroyed permanently.
	System IDs	Enter a user-defined computer asset tracking number and
		ownership tag.
Diagnostics Menu
	Select	To do this
	System Diagnostics Menu	■ System Information—Displays the following information:
		❐ Identification information for the computer and the batteries in the
		system.
		❐ Specification information for the processor, cache and memory
		size, system ROM, video revision, and keyboard controller
		version.
		■ Start-up Test—Verifies the system components needed for starting
		the computer.
		■ Run-In Test—Runs a comprehensive check on system memory.
		■ Hard Disk Test—Runs a comprehensive self-test on any hard drive in
		the system.
		■ Error Log—Displays a log file if any errors have occurred.

5–4 Maintenance and Service Guide