Dell 7.4 manual An OEM diagnostic event

Event Message	Severity	Cause
An OEM diagnostic event	Information	This event is generated when an
occurred.		OEM event occurs. OEM events
		can be used by the service team
		to better understand the cause of
		the failure.
CPU <number> protocol	Critical	This event is generated when the
error detected.		processor protocol enters a non-
		recoverable state.
CPU bus parity error	Critical	This event is generated when the
detected.		processor bus PERR enters a
		non-recoverable state.
CPU <number>	Critical	This event is generated when the
initialization error		processor initialization enters a
detected.		non-recoverable state.
CPU <number> machine	Critical	This event is generated when the
check error detected.		processor machine check enters
		a non-recoverable state.
All event logging is	Critical	This event is generated when all
disabled.		event logging is disabled.
Logging is disabled.	Critical	This event is generated when the
		ECC single bit error rate is
		exceeded.
The system board fail-	Critical	This event is generated when the
safe voltage is outside		system board voltages are not at
of range.		normal levels.
The system board fail-	Information	This event is generated when
safe voltage is within		earlier Fail-Safe system voltages
range.		return to a normal level.
A hardware	Critical	This event is generated when
incompatibility detected		there is a mismatch between the
between BMC/iDRAC		BMC and iDRAC firmware and
firmware and CPU.		the processor in use or vice
		versa.
A hardware	Information	This event is generated when an
incompatibility was		earlier mismatch between the
corrected between BMC/		BMC and iDRAC firmware and
iDRAC firmware and CPU.		the processor is corrected.
Device option ROM on	Critical	This event is generated when the
embedded NIC failed to		PCI device option ROM for a NIC
support Link Tuning or		does not support link tuning or
FlexAddress.		the Flex addressing feature.

223