Dell 7.4 manual Bad block table is full. Unable to log block %1

Related Alert	Clear Alert Number: None
Information	Related Alert Number: 2307
	Local Response Agent (LRA) Number: 2070
SNMP Trap	903
Numbers
Event ID — 2307
Description	Bad block table is full. Unable to log block %1.
Severity	Critical / Failure / Error
Cause and	Cause: The bad block table is used for remapping bad disk blocks. This table fills, as
Action	bad disk blocks are remapped. When the table is full, bad disk blocks can no longer
	be remapped and disk errors can no longer be corrected. At this point, data loss
	can occur. The %1 indicates a substitution variable. The text for this substitution
	variable is displayed with the alert in the alert log and can vary depending on the
	situation.
	Action: Replace the disk generating this alert. If necessary, restore your data from
	backup.
Related Alert	Clear Alert Number: None
Information	Related Alert Number: 2048
	Local Response Agent (LRA) Number: 2071
SNMP Trap	904
Numbers
Event ID — 2309
Description	A physical disk is incompatible.
Severity	Warning / Non-critical
Cause and	Cause: You have attempted to replace a disk with another disk that is using an
Action	incompatible technology. For example, you may have replaced one side of a mirror
	with a SAS disk when the other side of the mirror is using SATA technology.
	Action: See the hardware documentation for information on replacing disks.
Related Alert	Clear Alert Number: None
Information	Related Alert Number: None
	Local Response Agent (LRA) Number: 2070
SNMP Trap	903
Numbers
Event ID — 2310
Description	A virtual disk is permanently degraded.

144