Hardware Log Sensor Events
The hardware logs provide hardware status messages to the system management software. On particular systems, the subsequent hardware messages are not displayed when the log is full. These messages provide status and warning messages when the logs are full.
Table 13. Hardware Log Sensor Events
Event Message | Severity | Cause |
|
|
|
Log full detected. | Critical | This event is generated when the |
|
| SEL device detects that only one |
|
| entry can be added to the SEL |
|
| before it is full. |
|
|
|
Log cleared. | Information | This event is generated when the |
|
| SEL is cleared. |
|
|
|
Drive Events
The drive event messages monitor the health of the drives in a system. These events are generated when there is a fault in the drives indicated.
Table 14. Drive Events
Event Message | Severity | Cause |
|
|
|
Drive <Drive #> asserted | Critical | This event is generated when the |
fault state. |
| specified drive in the array is |
|
| faulty. |
|
|
|
Drive <Drive #> de- | Information | This event is generated when the |
asserted fault state. |
| specified drive recovers from a |
|
| faulty condition. |
|
|
|
Drive <Drive #> drive | Information | This event is generated when the |
presence was asserted. |
| drive is installed. |
Drive <Drive #> | Warning | This event is generated when the |
predictive failure was |
| drive is about to fail. |
asserted. |
|
|
Drive <Drive #> | Information | This event is generated when the |
predictive failure was |
| drive from earlier predictive |
deasserted. |
| failure is corrected. |
Drive <Drive #> hot spare | Warning | This event is generated when the |
was asserted. |
| drive is placed in a hot spare. |
Drive <Drive #> hot spare | Information | This event is generated when the |
was deasserted. |
| drive is taken out of hot spare. |
Drive <Drive #> | Warning | This event is generated when the |
consistency check in |
| drive is placed in consistency |
progress was asserted. |
| check. |
215
