Event ID — 1013
Description | System Peak Power detected new peak value Peak value (in |
| Watts): <Reading> |
Severity | Information |
Cause | The system peak power sensor detected a new peak value in power consumption. |
| The new peak value in Watts is provided. |
Event ID — 1014
Description | System software event: <Description> |
| Date and time of action: <Date and time> |
Severity | Warning |
Cause | This event is generated when the systems management agent detects a critical |
| system software generated event in the system event log which could have been |
| resolved. |
Event ID — 1015
Description Server Based Management Mode is enabled
SeverityInformation
Cause | This event is generated when the |
Event ID — 1016
Description Server Based Management Mode is disabled
SeverityInformation
Cause | This event is generated when the |
Temperature Sensor Messages
The temperature sensors listed help protect critical components by alerting the systems management console when temperatures become too high inside a chassis. The temperature sensor messages use more variables: sensor location, chassis location, previous state, and temperature sensor value or state.
Event ID — 1050
Description Temperature sensor has failed Sensor location: <Location in chassis>
Chassis location: <Name of chassis>
Previous state was: <State>
If sensor type is not discrete:
30
