Related Alert | Clear Alert Number: None |
Information | Related Alert Number: None |
| |
| Local Response Agent (LRA) Number: 2090 |
SNMP Trap | 853 |
Numbers |
|
Event ID — 2299 | |
Description | Bad PHY %1 |
Severity | Critical / Failure / Error |
Cause and | Cause: There is a problem with a physical connection or PHY. The %1 indicates a |
Action | substitution variable. The text for this substitution variable is displayed with the alert |
| in the alert log and can vary depending on the situation. |
| Action: Contact your technical support. |
Related Alert | Clear Alert Number: None |
Information | Related Alert Number: None |
| Local Response Agent (LRA) Number: 2091 |
SNMP Trap | 854 |
Numbers |
|
Event ID — 2300 | |
Description | The enclosure is unstable. |
Severity | Critical / Failure / Error |
Cause and | Cause: The controller is not receiving a consistent response from the enclosure. |
Action | There could be a firmware problem or an invalid cabling configuration. If the cables |
| are too long, they degrade the signal. |
| Action: Power down all enclosures attached to the system and reboot the system. |
| If the problem persists, upgrade the firmware to the latest supported version. You |
| can download the most current version of the driver and firmware from the |
| support site. Make sure the cable configuration is valid. See the hardware |
| documentation for valid cabling configurations. |
Related Alert | Clear Alert Number: None |
Information | Related Alert Number: None |
| Local Response Agent (LRA) Number: 2091 |
SNMP Trap | 854 |
Numbers |
|
Event ID — 2301 | |
Description | The enclosure has a hardware error. |
141
