Dell 7.4 manual Protection policy has been changed

Event ID — 2287

Description	Protection policy has been changed.
Severity	OK / Normal / Informational
Cause and	Cause: A new protection policy has been created / existing protection policy has
Action	been modified.
	Action: None
Related Alert	Clear Alert Number: None
Information	Related Alert Number: 2384
	Local Response Agent (LRA) Number: None
SNMP Trap	101
Numbers
Event ID — 2288
Description	The patrol read has resumed.
Severity	OK / Normal / Informational
Cause and	Cause: This alert is for informational purposes.
Action	Action: None
Related Alert	Clear Alert Number: None
Information	Related Alert Number: None
	Local Response Agent (LRA) Number: None
SNMP Trap	751
Numbers
Event ID — 2289
Description	Multi-bit ECC error on controller DIMM.
Severity	Critical / Failure / Error
Cause and	Cause: An error involving multiple bits has been encountered during a read or write
Action	operation. The error correction algorithm recalculates parity data during read and
	write operations. If an error involves only a single bit, it may be possible for the

error correction algorithm to correct the error and maintain parity data. An error involving multiple bits, however, usually indicates data loss. In some cases, if the multi-bit error occurs during a read operation, the data on the disk may be OK. If the multi-bit error occurs during a write operation, data loss has occurred.

Action: Replace the dual in-line memory module (DIMM). The DIMM is a part of the controller battery pack. See your hardware documentation for information on replacing the DIMM. You may need to restore data from backup.

137