Explanation | Specifies the type of configuration error that occurred, for example: |
| Configuration error type: Revision mismatch |
Description | Current sensor value (in Amps): <Reading> |
Line Item |
|
Explanation | Specifies the current sensor value in amps, for example: Current sensor value |
| (in Amps): 7.853 |
Description | Date and time of action: <Date and time> |
Line Item |
|
Explanation | Specifies the date and time the action was performed, for example: Date and |
| time of action: Sat Jun 12 16:20:33 2004 |
Description | Device location: <Location in chassis> |
Line Item |
|
Explanation | Specifies the location of the device in the specified chassis, for example: Device |
| location: Memory Card A |
Description | Discrete current state: <State> |
Line Item |
|
Explanation | Specifies the state of the current sensor, for example: Discrete current |
| state: Good |
Description | Discrete temperature state: <State> |
Line Item |
|
Explanation | Specifies the state of the temperature sensor, for example: Discrete |
| temperature state: Good |
Description | Discrete voltage state: <State> |
Line Item |
|
Explanation | Specifies the state of the voltage sensor, for example: Discrete voltage |
| state: Good |
Description | Fan sensor value: <Reading> |
Line Item |
|
Explanation | Specifies the fan speed in revolutions per minute (RPM) or On/Off, for example: |
| Fan sensor value (in RPM): 2600 |
| Fan sensor value: Off |
Description | Log type: <Log type> |
Line Item |
|
Explanation | Specifies the type of hardware log, for example: Log type: ESM |
Description | Memory device bank location: <Bank name in chassis> |
Line Item |
|
24
