Compaq 515, 511, 510 manual for use only on computer models equipped with a webcam

Removal and replacement procedures

12.If it is necessary to replace the display bezel or any of the display assembly internal components, remove the eight rubber screw covers 1 and 2 and the eight Phillips PM2.5×6.0 screws 3.

✎The rubber screw covers 1 on the display bezel top edge and bottom inside edge are larger than the rubber screw covers 2 on the display bezel bottom outside corners. The display bezel rubber screw covers are included in the Rubber Kit, spare part number 538448-001.

13.Flex the inside edges of the top edge 1, the left and right sides 2, and the bottom edge 3 of the display bezel until the bezel disengages from the display enclosure.

14.Remove the display bezel 4. The display bezel is available using the following spare part numbers:

❏538426-001—for use only on computer models equipped with a webcam

❏538425-001—for use only on computer models not equipped with a webcam

4–28 Maintenance and Service Guide