Advantech AIMB-250 user manual User’s Manual 3.5.11 Set Supervisor / User Password

User’s Manual

3.5.11Set Supervisor / User Password

You can set either supervisor or user password, or both of them. Supervisor Password: able to enter/change the options of setup menus.

User Password: able to enter but no right to change the options of setup menus.

Type the password, up to eight characters in length, and press <Enter>. The password typed now will clear any previously entered password from CMOS memory. You will be asked to confirm the password. Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not enter a password. To disable a password, just press <Enter> when you are prompted to enter the password. A message will confirm the password will be disabled. Once the password is disabled, the system will boot and you can enter Setup freely.

AIMB-250 User’s Manual 83