
Default Settings
Mode | Enhanced | Mode |
Port 1 | IRQ12 | Address 300H |
Port 2 | IRQ12 | Address 308H |
Port 3 | IRQ12 | Address 310H |
Port 4 | IRQ12 | Address 318H |
|
|
|
The following example shows how to set the base address to 2F8.
The switch sum is set to 2F8: 200 + 80 + 40 + 20 + 10 + 8 (HEX).
Note: On the
Interrupt Level (IRQ) Setting (S1, JP1, JP2, JP3, JP4)
The card's IRQ mode can be set using S1. Shared IRQ mode or independent IRQ mode is set as shown below.
1 6 |