5.4 ECDC Operation Mode Selection | [\N] |
\N0 Set modem to normal mode
\N1 Set modem to direct mode
\N2 Set modem to MNP reliable mode
\N3 Set to MNP/V.42
\N4 V.42 reliable with phase detection
5.5 MNP Response Code Option | [\V] |
\V0 Connect messages are controlled by the command settings X, W, and S95.
\V1 Connect message displayed in the single line format described below subject to the command settings V (Verbose) and Q(Quiet). In Non- Verbose mode(V0), single line connect messages are disabled and a single numeric result code is generated for CONNECT DTE.
5.6 Data Compression | [%C] |
%C0 Disable data compression
%C1 Enable MNP5 data compression negotiation %C2 Enable V.42bis data compression
%C3 Enable both V.42bis and MNP5 data compression (default)
5.7 Automatic Retrain | [%E] |
%E0 Disable
%E2 Enable fallback/fall forward
Page: 26
