44
Gateway: The next stop gateway of the path toward the destination LAN. This is the IP of the
neighbor router that this router should communicate with on the path to the destination LAN.
Dynamic Routing
Dynamic Routing can be used to cache routes learned by routing protocols, thus allowing
the automation of static routing mainte nance. The router, using the RIP (Routing Information
Protocol) protocol, determines the network packet’s route based on the fewest number of hops
between the source and the destination. In this case, you could automatically adjust to
physical changes in the network layout.
Working Mode: Select whether the wireless broadband router acts like router or gateway.
Listen Mode: Enable this mode to allow RIP server to receive routing information and
updating the routing information.
Supply Mode: Enable this mode to allow RIP server to send out routing information and
updating the routing information.
3.8 UPnP (Universal Plug and Play)
UPnP Settings
UPnP (Universal Plug and Play) allows automatic discovery and configuration of
equipment attached to your LAN. UPnP is by supported by Windows ME, XP, or later. It
provides compatibility with networking equipment, software and peripherals of the over 400