At the end of the programme

How to wash

The machine stops automatically and three flashing zeros are displayed.

The END (PROGRAM SONU) and spin speed pilot lights, as well as the pilot light(s) corresponding to the selected option(s), stay on.

If the ANTICREASE (SUDA BEKLETME) option has been selected, the corresponding pilot light on the programme phase indicator flashes to indicate that the water must be emptied out before opening the door.

The pilot light of the START button flashes and tree flashing zeros are displayed.

Release of the lock is indicated by an audible signal as well as the pilot light going out.

Switch the machine off by pressing the ON/OFF (AÇMA KAPAMA) but- ton.

Turn the programme selector knob to CANCEL (IPTAL).

Remove the laundry from the drum

Check that the drum is empty so as to avoid a subsequent wash being damaged by any forgotten items.

Close the water tap.

Leave the door open to prevent the formation of mildew and unpleas- ant smells.

Page 25

Image 25

AEG 135 EL manual At the end of the programme

Contents

Lavamat 135 EL Dear customer Contents Page General notes Safety instructionsPositioning, connection, starting up Follow the instructions for positioning and connection Proper use Child safety Packaging materials DiscardingMachine Tips for environmental protection Main features of your washing machine Front view Description of the appliance Mains on light Control panelON/OFF button Açma Kapama Buttons and corresponding functions Display Delay Start button Geciktirme TU‚UDisplay shows the following information Prewash button ÖN Yikama Quick Wash button Kisa YikamaExtra Rinse button EK Durulama Anticrease button stop with water in drum Spin Speed button Sikma START/PAUSE button Start ARA VermeStart Pause Cancelling a programme Programme phase indicatorSymbols on the programme selector Programme selector Opening the door after the programme has started Before the first wash Detergent and additive dispenser drawer Sorting out and preparing the laundry Preparing the wash cycle Whites Types of fabric and care labelsColoureds Coloureds 40 Woollens and particularly delicate items Delicates 40 Detergents and additives Switching the machine on How to washLoad the laundry Add detergent and additive Selection of the spin speed Selection of the desired wash programmeSpin Speed Sikma button the corre Sponding light comes on Corresponding light comes on Starting the programme Selection of the Delay Start option Geciktirme TU‚U At the end of the programme Wash programmes Programme chartWash Temp Fabrics Additional Max Consumption Type Special programmesMax Consumption Laundry Periodical cleaning Bodywork Cleaning and maintenanceAfter each wash Detergent dispenser drawer Water inlet filter Drain filter Emergency emptying out Frost precautions Problem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution Problem Feet have not been Problem Possible cause Solution If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundry This appliance complies with the following EC directives Technical data Service Safety instructions Instructions for installation and electrical connection Rear view Dimensions of the appliance Unpacking Installation Levelling PositioningBefore placing it on small tiles, apply a rubber coating Permanent connection Electrical connectionDirectly into a Not more than 90 cm End Water drainage Water inletEnd of the drain hose can be positioned in three ways