Something not working?

Problem

 

Possible cause

 

Solution

 

 

 

 

 

The machine vibrates or is noisy

The door will not open

The transit bolts have

Check that the machine

not been removed.

has been unpacked as

 

described in the Installation

 

section.

The feet have not been

Carefully level the machine.

adjusted.

 

There is little laundry in

Correct operation of the

the drum.

machine is not affected.

The machine is in contact

Move the machine slightly

with the wall or furniture.

away from the wall or

 

furniture.

 

 

The programme is still

Wait until the end of the

running.

programme before opening

 

the door.

The door lock has not yet

Wait about 2 minutes for

released.

the door lock to release.

 

The door cannot be opened

 

until the pilot light located

 

next to the door handle

 

has gone out.

The water level is above the

Before opening the door,

bottom edge of the door.

the water must be emptied

 

out.

The machine is heating the

Wait until the end of the

water.

heating phase.

 

 

75

Page 33
Image 33
AEG 135 EL manual Feet have not been