Something not working?
If, during the spin cycle, the machine makes an unusual
whistling noise, different from the noise made
by traditional washing machines, this is due to
a new type of motor.
If water is not visible in the drum, this is due to
the modern technology of new washing
machines that use less water than traditional
machines.
Troubleshooting
If a problem arises, you can try to solve it yourself following the
instructions below. If you call out an engineer when one of the follow-
ing problems arises, or to repair a fault due to incorrect use, the call-
out will be charged even if requested within the guarantee period.
During machine operation the following alarm codes may be displayed:
-E00: problem with the water supply
-E10: problem with water draining
-E20: door open
Once the problem has been eliminated, press the START/PAUSE button
to restart the programme. If after all checks, the problem persists, con-
tact your local Service Centre.
73
Problem
The machine does not work
Possible cause
The ON/OFF (AÇMA Depress the button.
KAPAMA button) has not
been depressed.
The main electrical fuse Replace the fuse.
has blown.
The door is not properly Close the door; the click
closed (E20).of the lock should be heard.
The plug is not connected. Insert the plug.
The START ARA VERME Press the button.
button has not been pressed.
The programme selector Set the selector to the
has not been set correctly. chosen programme.
The GECIKTIRME TUÇU Check the selected delay on
option has been selected. the display.
Solution