Drying Time button, Display, Programme progress display | AEG 14820

Description of the appliance

DRYING TIME button

If you wish to carry out a timed programme of dryness push the button until the drying time you want appears in the display according to the fabrics (cotton or synthetics) you have to dry.

For cottons and synthetics you can select a drying time from 10 minutes to 130 minutes.

Display

The display shows the following information:

•Duration of the selected programme (in minutes), calculated auto- matically on the basis of the maximum recommended load for each type of fabric.

•Selected drying time (max. 130 minutes for cotton and for synthet- ics).

After the programme has started, the time remaining is updated every minute.

•When the programme has finished, a steadily lit zero is displayed.

•Delayed start, (23 hours max.) programmed using the special button

. The countdown is updated every hour and by 30 minutes during the last two hours.

•Alarm code indicating a fault in the machine operation (see page 37).

Programme progress display

By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.

After the machine has started, only the running phase pilot light stays on. When the programme

has finished, the pilot light comes on.

PREWASH/

WASH

RINSES

EXTRA

RINSE

SPIN

DRYING

END

OVERDO

DOSAGE

DOOR

When the programme has finished, if the light (OVERDOSAGE) comes on, it indicates that too much detergent has been used.

15

Image 15

AEG 14820 manual Drying Time button, Display, Programme progress display, Has finished, the pilot light comes on

Contents

Lavamat Turbo Dear customer Contents Page Contents Technical data Service Follow the instructions for positioning and connection Safety instructionsGeneral safety Positioning, connection, starting up Proper use Child safety Machine DisposalTips for environmental protection Packaging materials Main features of your washer-dryer Front view Description of the appliance Cottons Synthetics Control panelProgramme selector dial Tions This function cannot be used with Programme Option buttonsPosition at 40C = Easy to iron Position = drying Programme Sensitive Delay Start button START/PAUSE buttonElectronic Drying button Has finished, the pilot light comes on Drying Time buttonDisplay Programme progress display Cancelling a programme Altering an option which is runningOpening the door after the programme has started Before the first wash Detergent dispenser drawer Sorting out and preparing the laundry Preparing the wash cycle Synthetics Sort of laundry Approximate Dry weightsTypes of fabric and care labels Cotton Delicates 40 Detergents and additives As a dryer, the machine works on the condensation principle Preparing the drying cycleLoad Garments not suitable for drying Fibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying time or degree of drying Load the laundry How to washAdditional drying Max. load Synthetics 900 r.p.m Delicates Wool Selection of the desired wash programmeSelection of the desired options Selection of the spin speed or option Selection of the option Starting the programmeOn the display appears 0’. Press the button again At the end of the programme Select the wash programme Automatic washing and dryingNON-STOP programme Add detergent and additive Drying only Max. load How to dry Wash programmes Programme chart Tion Special programmesDescrip Consumption Drying Degree of dryingDrying time Spin speed Mins 1400 Consumption data for drying Max Water Energy Duration Load900 Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each wash Drain pump Door seal Frost precautions Water inlet filterEmergency emptying out Troubleshooting Problem Possible cause SolutionSomething not working? Possible cause Solution Problem Noisy Feet have not been E10 Problem Possible cause White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinse Technical data Water pressure 05-0,8 MPaThis appliance complies with the following EC directives Service Safety instructions for the installer Instructions for installation and electrical connection Dimensions of the appliance Front view and side viewRear view Unpacking Installation Positioning LevellingPlug the open Holes with Water inlet Water drainageEnd of the drain hose can be positioned in three ways Electrical connection Permanent connectionConnect the machine to an earthed socket From the Electrolux Group. The world’s No choice