Cancelling a programme | AEG 14820 instruction

Description of the appliance

Cancelling a programme

To cancel a programme which is running, turn the programme selector dial to the RESET/O position.

Warning! After a programme which ends with water in the drum ( ), turn the selector dial first to O and then to the the , or programmes.

Altering an option which is running

To alter an option, first set the machine to PAUSE by pressing the button.

Any option can be modified before the machine starts it. After select-

ing the new option press the button again to re-start the select- ed programme.

To modify the selected programme turn the programme selector dial to

Oand then choose a new programme.

The water is not emptied out and after pressing the button again the machine restarts with the newly selected programme.

Opening the door after the programme has started

To open the door set the machine to PAUSE by pressing the but- ton.

The (DOOR) light on the control panel indicates if the door can be opened:

•green light: the door can be opened;

•red light: the door cannot be opened; The door can be opened if:

•the machine is not already heating or drying;

•the water level is not above the bottom edge of the door;

•the drum is not turning.

If you need to open the door, switch the machine off by turning the selec- tor dial to position O/OFF, and wait about 3 minutes before opening the door (pay attention to the temperature and the level of the water in the tub).

16

Image 16

AEG 14820 Cancelling a programme, Altering an option which is running, Opening the door after the programme has started

Contents

Lavamat Turbo Dear customer Contents Page Contents Technical data Service Safety instructions General safetyPositioning, connection, starting up Follow the instructions for positioning and connection Child safety Proper use Disposal Tips for environmental protectionPackaging materials Machine Main features of your washer-dryer Description of the appliance Front view Control panel Programme selector dialTions Cottons Synthetics Programme Option buttons Position at 40C = Easy to ironPosition = drying This function cannot be used with Sensitive Programme START/PAUSE button Delay Start buttonElectronic Drying button Drying Time button DisplayProgramme progress display Has finished, the pilot light comes on Altering an option which is running Cancelling a programmeOpening the door after the programme has started Detergent dispenser drawer Before the first wash Preparing the wash cycle Sorting out and preparing the laundry Sort of laundry Approximate Dry weights Types of fabric and care labelsCotton Synthetics Delicates 40 Detergents and additives Preparing the drying cycle LoadGarments not suitable for drying As a dryer, the machine works on the condensation principle Drying symbols on garment labels Duration of the drying cycleModification of the drying time or degree of drying Fibre residue How to wash Additional dryingMax. load Load the laundry Selection of the desired wash programme Selection of the desired optionsSelection of the spin speed or option Synthetics 900 r.p.m Delicates Wool Starting the programme Selection of the optionOn the display appears 0’. Press the button again At the end of the programme Automatic washing and drying NON-STOP programmeAdd detergent and additive Select the wash programme How to dry Drying only Max. load Programme chart Wash programmes Special programmes DescripConsumption Tion Degree of drying DryingDrying time Spin speed Mins 1400 Max Water Energy Duration Load Consumption data for drying900 Cleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawer Door seal Drain pump Water inlet filter Frost precautionsEmergency emptying out Problem Possible cause Solution TroubleshootingSomething not working? Problem Possible cause Solution Noisy Feet have not been Problem Possible cause E10 Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundry Water pressure 05-0,8 MPa Technical dataThis appliance complies with the following EC directives Service Instructions for installation and electrical connection Safety instructions for the installer Front view and side view Dimensions of the applianceRear view Installation Unpacking Levelling PositioningPlug the open Holes with Water drainage Water inletEnd of the drain hose can be positioned in three ways Permanent connection Electrical connectionConnect the machine to an earthed socket From the Electrolux Group. The world’s No choice