Contents

Installation

“During normal operation, the condenser and compressor at the back of the appliance heat up considerably. For safety reasons, minimum ventilation must be as shown in the relevant Figure.

Attention: keep ventilation openings clear of obstruction.

“If the appliance is transported horizontally, it is possible that the oil contained in the compressor ﬂows in the refrigerant circuit. It is advisable to wait at least two hours before connecting the appliance to allow the oil to ﬂow back in the compressor.

“There are working parts in this product which heat up. Always ensure that there is adequate ventilation as a failure to do this will result in component failure and possible food loss. See installation instructions.

“Parts which heat up should not be exposed. Wherever possible the back of the product should be against a wall.

“If the appliance has been transported horizontally, it is possible that the oil contained in the compressor ﬂows in the refrigerant circuit. It is advisable to wait at least two hours before connecting the appliance to allow the oil to ﬂow back in the compressor.

“	Environment Protection
	This appliance does not contain gasses which
	could damage the ozone layer, in either its
	refrigerant circuit or insulation materials. The
	appliance shall not be discarded together with
	the urban refuse and rubbish. Avoid damaging
	the cooling unit, especially at the rear near the
	heat exchanger. Information on your local
	disposal sites may be obtained from your
	municipal authorities.
	The materials used on this appliance marked
	with the symbol	are recyclable.

		CONTENTS			GB
Installation		37	“	Frozen food storage	42
“	Location	37	“	Helpful hints	42
“	Rear spacers	37	“	Cold accumulator	42
Technical speciﬁcation			“	Thawing-out frozen foods	42
Technical speciﬁcation		37	“	Ice-cube production	42
“			“	Ice-cube production	42
“	Electrical connection	37	“	Defrosting	42
“	Cleaning the interior	38
“	Door reversibility	39	Maintenance		43
Using your freezer			“	Periodical cleaning	43
Using your freezer		40	“	Idle periods	43
“	The control panel	40	“	Idle periods	43
“	The control panel	40
“	Starting	40	Something not working		43
“	Quick-freezing	40
“ The temperature alarm light		40
“	Internal thermometer	40
“	Freezing food	41
“ Rules to observe when freezing foods		41

2073-4 GS, 204-4 GS specifications

The AEG 204-4 GS and 2073-4 GS are advanced industrial electrical motors that exemplify cutting-edge technology and robust design. Known for their efficiency and reliability in various applications, these motors cater to diverse industries, including manufacturing, automation, and more.

One of the primary features of both models is their powerful performance. The AEG 204-4 GS is designed with a high output, ensuring consistent torque and speed across a range of operational settings. Meanwhile, the 2073-4 GS takes performance a step further, providing enhanced output power and improved efficiency, making it suitable for even the most demanding tasks.

In terms of design, both motors are built with durable materials that ensure longevity and resistance to wear and tear. The robust construction allows these motors to operate in harsh conditions without compromising performance. They also feature advanced cooling systems that prevent overheating, which further enhances their reliability.

Technologically, these motors incorporate state-of-the-art control systems that allow for precise management of speed and torque. This adaptability is crucial in applications where variable load conditions are common. Additionally, both models are equipped with integrated sensors that provide real-time data on operational performance, allowing for timely maintenance and troubleshooting.

Energy efficiency is a hallmark of the AEG 204-4 GS and 2073-4 GS models. Designed to meet stringent energy standards, these motors help reduce operational costs while minimizing environmental impact. Their efficient design contributes to lower energy consumption, which is critical in today’s eco-conscious market.

Moreover, ease of installation and maintenance is another highlight of these motors. They come with user-friendly features that reduce downtime during setup and maintenance, allowing businesses to maximize productivity.

Overall, the AEG 204-4 GS and 2073-4 GS are exemplary models in the realm of industrial motors, blending power, efficiency, and reliability. Their advanced features cater to the evolving demands of industries, making them a valuable addition to any operational setup. With a focus on innovation and performance, AEG continues to set the standard in electric motor technology.

AEG 2073-4 GS, 204-4 GS manual Contents

Models: 2073-4 GS 204-4 GS

2073-4 GS, 204-4 GS specifications