Freezing food

Set the freezer to quick-freezing operational status. Wait at least 3 hours before introducing fresh foods into the freezer if it has only recently been turned on.

If the freezer has already been working for some time, turn the respective knob to the «S» position at least 24 hours before introducing the food into the freezer in order to ensure better freezing results. This period of time may be shortened according to the quantity of food.

When quick-freezing is being performed, the compressor works continuously, employing all of its refrigerating power to the maximum.

Keep the knob as it is for another 24 hours after the introduction of the food into the freezer and then return the knob to the «N» position.

Bear in mind the freezing capacity of your freezer; that is, the maximum quantity of food that may be frozen in 24 hours.

This freezing capacity is 22 kg.

Distribute the packages as shown in Figure 7.

Arrange the foods to be frozen in the upper compartments.

When the necessary freezing time has elapsed, distribute the newly-frozen foods into the drawers to free the compartments for new foods to be frozen.

Rules to observe when freezing foods

All products to be frozen must be fresh and of excellent quality.

Each freezing package must be adjusted to the family’s consumption quantity in order to be used just once. Small-sized freezing packages allow a more rapid and uniform freezing.

Do not forget that once frozen foods have thawed out, they spoil rapidly.

Low-fat content foods are better conserved in the freezer than those with higher fat content. Salt (whenever present) reduces the duration of satisfactory conservation.

Foods to be frozen must be enclosed in air-tight sacks or containers especially indicated for this purpose.

Close these sacks or containers tightly to eliminate all air.

Never place bottles or cans of carbonated beverages in the freezer. These might explode.

Never introduce hot foods or liquids.

Never fill the freezing sacks or containers with covers to the brim.

Do not consume certain products (popsicles, etc.) immediately after removing them from the freezer, because their extremely low temperature might cause burns.

A

B

C

D309

Fig. 7

11 Kg

11 Kg

Indicate the freezing date on every sack or container as a means of controlling conservation times.

Never open the freezer door or introduce new foods to be frozen whenever a Quick-freezing phase is already in progress.

A special card is located in the holder on the inner door of the freezer compartment. On the upper part it shows pictures of different types of food followed by a figure. These figures indicate the maximum storage time, in months, for each type of food.

Details of food being stored, can also be written in pencil on the lower part of the card.

Important

When electrical current happens to be cut off, the freezer door must not be opened. If the power failure is short (up to 6-8 hours) and the freezer is full, there is no risk that the food will spoil.

If the power failure lasts longer, the food must be consumed as rapidly as possible, or otherwise cooked and re-frozen again.

41

Page 8
Image 8
AEG 204-4 GS, 2073-4 GS manual Freezing food, Rules to observe when freezing foods

2073-4 GS, 204-4 GS specifications

The AEG 204-4 GS and 2073-4 GS are advanced industrial electrical motors that exemplify cutting-edge technology and robust design. Known for their efficiency and reliability in various applications, these motors cater to diverse industries, including manufacturing, automation, and more.

One of the primary features of both models is their powerful performance. The AEG 204-4 GS is designed with a high output, ensuring consistent torque and speed across a range of operational settings. Meanwhile, the 2073-4 GS takes performance a step further, providing enhanced output power and improved efficiency, making it suitable for even the most demanding tasks.

In terms of design, both motors are built with durable materials that ensure longevity and resistance to wear and tear. The robust construction allows these motors to operate in harsh conditions without compromising performance. They also feature advanced cooling systems that prevent overheating, which further enhances their reliability.

Technologically, these motors incorporate state-of-the-art control systems that allow for precise management of speed and torque. This adaptability is crucial in applications where variable load conditions are common. Additionally, both models are equipped with integrated sensors that provide real-time data on operational performance, allowing for timely maintenance and troubleshooting.

Energy efficiency is a hallmark of the AEG 204-4 GS and 2073-4 GS models. Designed to meet stringent energy standards, these motors help reduce operational costs while minimizing environmental impact. Their efficient design contributes to lower energy consumption, which is critical in today’s eco-conscious market.

Moreover, ease of installation and maintenance is another highlight of these motors. They come with user-friendly features that reduce downtime during setup and maintenance, allowing businesses to maximize productivity.

Overall, the AEG 204-4 GS and 2073-4 GS are exemplary models in the realm of industrial motors, blending power, efficiency, and reliability. Their advanced features cater to the evolving demands of industries, making them a valuable addition to any operational setup. With a focus on innovation and performance, AEG continues to set the standard in electric motor technology.